Gigabyte GeForce GTX 750 Ti WindForce review -
Overclocking
Overclocking The Graphics Card
As most of you know, with most video cards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply to tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What Do We Need?
One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.
Where Should We Go?
Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 900 MHz (which is pretty common these days) then I suggest that you don't increase the frequency any higher than 25 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.
In short, use something like Afterburner or a tool of your preference.
| Original | This sample | Overclocked |
| Core/Boost Clock: 1020/1085 MHz | Core/Boost Clock: 1033/1111 MHz | Core/Boost Clock: 1168 / 1293 MHz |
| Memory Clock: 5400 MHz | Memory Clock: 5400 MHz | Memory Clock: 6712 MHz |
With the physical board power limit you are going see all cards roughly ending at this overclock and boost frequency. We now have extra performance at our hands on top of the factory overclock, have a peek at the results when overclocked.
For all overclocked games above we have used the very same image quality settings as shown before. Overall we have been able to get another 10% performance out of this graphics card.
After the reference review we will now review the Gigabyte GeForce GTX 980 G1 SOC gaming graphics card. Armed with a totally custom design, two 8-pin power feeds and an all new WindForce based cooler ...
Gigabyte GeForce GTX 970 G1 Gaming review
Next to the flagship product we also test the more budget Gigabyte GeForce GTX 970 G1 SOC gaming graphics card. The product does not vary much from that 980 other then a chunk of performance. This car...
Gigabyte X99 SOC Force Motherboard Review
In this review we check out the Gigabyte X99 SOC Force, will the force be strong with this one ? We certainly can tell you that is is one of the most impressive X99 motherboards we have had our hands ...
Gigabyte Force K7 Stealth gaming keyboard review
Gigabyte released the Force K7 Stealth gaming keyboard which we review. Not a 125 EURO mechanical for a change as you know, mechanical switches make keyboards expensive, this is a 30 EUR budget gamin...

