Inno3D GeForce GTX 760 iChill review -
Alright... photo's! A couple of pages with photos then and most of it from our own photo-shoot :)
So as you can see the GeForce GTX 760 iChill with HerculeZ cooler from inno3D is rather big in size. The card is using a triple-slot cooler which uses three silent 90mm fans. An aluminum radiator covers the VRM and even memory area. If we do the math we think the cooler can dissipate roughly 450W of heat whilst remaining silent. As a result under full load this card manages to stay under 50 degrees C in our testing. Absolutely impressive.
With the GeForce GTX 760 you will receive four display connectors, you'll spot a full size Display port connector, one full size HDMI connector and two DVI connectors (dual-link). You can combine these connectors to setup a surround view (multi-monitor) setup. One card will give you more than sufficient performance to play your games on three monitors. Nice booty, ehm air exhaust btw.
To date we still receive this question a lot, but dual-link DVI does not mean you can hook up two monitors to one connector. Dual-link means double the signal, that way monitor resolutions over 1920x1200 can be supported or you could use a 120Hz monitor. So explained very simple, dual-link DVI supports high-resolution (above 1920x1200) or high-refresh rate (120Hz) monitors.
Inno3D offers this card factory clocked for you at 1059 MHz (Ref 1046) with a Boost clock of 1124 MHz (Ref 1085). And as our article will show later on, there's a lot of room left for tweaking as we got this little puppy running stable at roughly 1350 MHz on the boost frequency.
The card is almost 12 Inches in length which is like 30 cm.
In this article we review the beast, the GTX 770 HerculeZ X3 Ultra from Inno3D is locked and loaded with the mighty HerculeZ X3 cooler, that's three slots wide but keeping the GPU under 55 Degrees C and completely silent. Pure awesomeness. That's not all though, it is factory overclocked for you at a very high level but even so can be tweaked quite a bit further.
Inno3D GeForce GTX 760 iChill review
In this article we review the Inno3D GeForce GTX 760 iChill edition, this particular model comes with a three-slot HerleZ cooing solution.
Inno3D GeForce GTX 660 Ti iChill review
In this review we'll look at the GeForce GTX 660 Ti from Inno3D, it's their all new GeForce GTX 660 Ti iCHILL version and to date is one of the most impressive graphics cards in the 660 Ti range we have tested.
Inno3D GeForce GTX 580 OC review
We review the Inno3D GeForce GTX 580OC. Despite a very high price tag the product seems to become a nice success. As such directly at launch several models based of this SKU where already announced, e.g. the regular clocked models, factory higher clocked models, liquid cooled models. This OC edition, in particular this is a reference GeForce GTX 580 that has been clocked faster to 820 MHz on the core where it also welcomes a nice bump on the overall memory frequency.