As most of you know, with most videocards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply to tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need? One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.
Where should we go? Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.
All in all... do it at your own risk.
Core Clock: 822MHz
Core Clock: 822MHz
Core Clock: 980MHz
Shader Clock: 1644MHz
Shader Clock: 1960MHz
Memory Clock: 4008MHz
Memory Clock: 4900MHz
Now we left fan control at default, thus self regulating and during the overclock it did not at all become noisy. Our stable end result was an totally amazing 980 MHz on the core and 4900MHz on the memory. Temp went up merely a few degrees C. We did not apply any voltage tweak or anything.
Here's what that does towards overall game performance.
Above Call of Duty: Modern Warfare 2, maxed out image quality settings as before with 4xAA 16xAF
Above Battlefield Bad Company 2, maxed out image quality settings as before with 8xAA 16xAF
GeForce GTX 1070 2-way SLI review We review two MSI GeForce GTX 1070 Gaming X editions graphics cards in a 2-way Multi-GPU setup. We'll obviously focus at Ultra HD performance as well as a micro stuttering analysis with the help of F...
ASUS ROG Strix GeForce GTX 1080 review ASUS unleashes their first GTX 1080 ROG card, the STRIX edition has been set free to run in the wild. It is armed with an all custom design including the STRIX cooler and a very healthy factory tweak....
Gigabyte GeForce GTX 1080 G1 GAMING review Gigabyte released their GeForce GTX 1080 G1 GAMING edition graphics card. This bad boy is what many of you have been waiting for, all custom, all tweaked and cooled much better opposed to the founder...