G.Skill Phoenix PRO 120GB SSD review

Posted by Hilbert Hagedoorn on: 07/29/2010 01:00 PM [ 0 comment(s) ]

Final Words and Verdict

The verdict

Compared to the previously tested 100GB model we can see very little difference in terms of overall performance for the new 120GB sized Phoenix PRO. We spot really top notch performance, and that certainly does not disappoint, quite honestly ...the conclusion should and can be the same as the 100GB we tested, slightly slower yet you simply gained some more volume size. If G.Skill will keep the price the same than that's a very interesting product really.

We can state that performance was good, really good. The drive is a tiny notch slower than OCZ's Vertex 2, but they have their own proprietary design and firmware. Comparing apples to apples, the 100GB Vertex 2 and 100GB Phoenix might be a tiny bit faster, in real-world usage however that is never something you'd notice.

SandForce1200 controller based SSDs as shown today are extremely good in productivity, they handle small files exceptionally well. Where they really shine though is writing small files (4KB) random, the In/Out performance (IOPS) there is phenomenal. That alone though, is not enough to justify a higher price over the Indilinx based product as with desktop usage, again you'd probably won't even notice it -- SSDs with cache memory like Indilinx are already so fast.

If you have the money for it, use an SSD like the G.Skill Phoenix as boot/root drive for your OS, Games and applications and pop in a nice massive HDD for storage of your documents, music and movies. That very combination is brilliant and though people are still very weary making a move from HDD to SSD, we can only say .. once you turned to SSD, there's now ay in hell you ever want to go back.

By re-releasing the Phoenix as Phoenix PRO in this 120GB version you gain another 20GB in volume size. The performance differences in-between the initial model and this one are close to nothing making this the better choice.

We hope to see some better availability of G.Skill products as that right now is a bit of an issue. Overall G.Skill is a little cheaper compared to names like OCZ and Corsair, offerin nearly the same drives. So if you are in the market for an SSD of this caliber and can find it in etail, then by all means do not hesitate. This is a fully fetched blazing fast SSD. Turn on AHCI in your BIOS, and you'll have Trim, NCQ and hot-swappability available for you as well.

The Phoenix 120GB now comes with a hand 3.5" bracket for HDD bay installation and you'll receive a 3-year warranty similar to other vendors. This product comes very much recommended.

Leave/read feedback on this product
Sign up to receive a notice when we publish a new article
Or go back to Guru3D's front page

13 pages « < 10 11 12 13

G.Skill Sniper 8GB CL7 DDR3 memory review
G.Skill designed another 8GB low voltage DDR3 kit (2x 4GB) that can be set at 1600 MHz yet still run a CAS latency of 7. And that is truly interesting because the denser the ICs get, the higher latency typically gets.

G.Skill 2x4GB CL7 1600 MHz Trident DDR3 review
We feel that more memory is rather important, and in that trend memory manufacturers have started to increase the density of DIMM modules. Where 1 and 2GB DIMM modules have been the standard, we now see very good progress in 4 GB DIMM modules. Today we\'ll do things a little different, G.Skill designed a 8GB low voltage DDR3 kit (2x 4GB) that can be set at 1600 MHz yet still run a CAS latency of 7. And that is truly interesting because the denser the ICs get, the higher latency typically gets.

G.Skill Flare DDR3 2000 MHZ C7 AMD kit review
We test and review the G.Skill Flare DDR3 2000 MHZ C7 AMD kit. These kits are optimized for AMD platforms preferably with the new six-core X6 processors, and in specific some ASUS motherboards. The kit we'll be testing today obviously comes from that series and is a 2,000MHz CL7-9-7-24 1.65V 4GB (2GBx2) DDR3 kit with its latest Flare heatsinks.

G.Skill Phoenix PRO 120GB SSD review
The SSD tested today once again is the Phoenix series from G.Skill. After we tested their 100GB Phoenix SSD (which received a very positive review) G.Skill instantly requested if we would like to review the 120GB PRO model. Both drives pretty much are the same thing, same controller ... The 100GB Phoenix uses Samsung memory though but the trick is that there is 20GB extra volume space available on the new 120GB Pro (compared to the 100GB model) for nearly the same price. A new Firmware for the SandForce 1200 based controller that is inside this 120GB model simply reserves less NAND flash memory for its data-compression scheme. As a result the overall write performance could be a tiny bit slower, but only a few percent as best. It however will give you 20 GB more space to play around with at the same price. And since price per GB is everything in the land of SSDs -- this certainly is a significant for any vendor and for you as an end-user.