The H90 is a 140mm Performance Liquid CPU Cooler, so if you recognise the design that would be why. The cooling setup itself uses that all to familiar low-profile cooling unit design with a micro-channel copper cold plate. Here is the Corsair PR skinny on the product:
The Corsair Hydro Series H90 is a fantastic choice for cooling your Intel or AMD CPU, whether you just want low, reliable CPU temperatures and low noise, or you want to crank up the frequencies and CPU voltage for greater performance. The Hydro Series H90 builds on the success of the existing Hydro Series CPU cooler product line by offering a larger radiator, and quieter 140mm fans. The H90 also includes the latest generation copper cooling block with improved flow and new hoses made from a highly-flexible rubber material which resists evaporation and makes routing and installation easier. The H90 uses a standard 3 pin fan header for the pump unit, and a 4 pin fan header the included fan.
The Hydro Series H90 radiator is bigger than most traditional all in one water coolers, so you will need to be sure that you are using a case that has room for mounting a 170mmx140mm length radiator, you will find a compatibility chart listing compatibility with Corsair cases below in the installation section. Just like previous models of our Hydro Series Coolers, the Hydro Series H90 supports both AMD and Intel sockets right out of the box. All current AMD and Intel sockets are supported.
Radiator dimensions: 140mm x 170mm x 27mm
Fan dimensions: 140mm x 25mm
Fan speed: 1500 +/- 10% RPM
Fan airflow: 94 CFM
Fan static pressure: 1.64mm-H2O
Noise level: 35dB(A)
Intel LGA 1155, 1156, 1366, and 2011
AMD sockets FM1, FM2, AM2, and AM3
Corsair Hydro Series H90 High Performance Liquid CPU
Mounting kit for all modern CPU sockets
140mm High Torque Fan
Fan and radiator mounting screws
Thermal compound (pre-applied)
Quick Start Guide
All current Intel socket formats are covered too, so whether you have a LGA1155, LGA1156, LGA1366 or LGA2011 motherboard, the Hydro Series H90 can cool your processor out-of-the-box. The AMD and Intel brackets now magnetically attach to the cooling unit so you no longer need a screwdriver to switch them out.
The Hydro Series H90 includes one 140mm fans that offer high static pressure with low noise levels. The high static pressure is essential for good cooling performance, as it enables a sufficient amount of cold air to be pushed through the dense array of cooling fins in the radiator. 140mm fans are able to move more air at a lower RPM than 120mm fans, making this cooler an ideal choice for anyone that wants good cooling and low noise levels.
With dimensions of 140mm x 170mm x 27mm, the H90 uses a larger radiator than other last-gen Corsair Hydro Series coolers. The benefit from this increase in size is that there is more surface area for the fans to come into contact with and effectively cool. Another benefit of having a larger radiator is that there is a higher capacity of liquid within the unit. The increase in liquid means that it takes longer for the liquid to make a complete loop through the cooler, giving it more time to cool off before making its way back to the cooling block, where it will continue to remove heat from the CPU.
If you stick to Corsair chassis then the H90 will fit on the following cases ate these locations:
TOP mount - 900D, 650D, 500R and C70.
REAR mount - 550D
Corsair will give your a cool 5 years warranty on this product. A quick search shows prices of roughly 90 EUR for the H90 here in the Netherlands. But let's have a look at the product in more detail.
Corsair H75 review In this review we test the Corsair H75 liquid cooler. The H75 features a 120 mm radiator that is a good 25mm but also was applied with two really silent low RPM fans, so you add this kit in a push-p...
Corsair H105 review We test and review the Corsair H105 liquid cooler. The H105 features a 240 mm radiator that is thicker then normal, with a 38 mm thickness. As comparison the H100 uses a 27mm tick radiator....
Corsair Obsidian 250D review We review a new chassis from Corsair, it is the Obsidian 250D. A small mITX form factor ready chassis that will house the smallest, but also the biggest stuff inside your OC. Not mid, not full, mini and this...
Corsair RM650 Watt Gold PSU review We review the Corsair RM650 GOLD power supply. Yes, the silent and a bit mainstream RM650 is now Gold certified, that means it's 90% efficient at 50% load. Efficiency matters. The PSU itself is partly modular, for most of you with a side panel window in their chassis a must really as you'll want modular cables. The new PSU also improved on the audibility front. Have a peek at the article.