We had a peek at a selection of stages in overclocking and their respective temperatures, have a look at the following results please.
We enforce 4600 MHz onto the processor clock frequency by changing the multiplier.
We give the processor 1.20 Volts and then (next page) later on, 1.30 Volts
The problem with a Core i7 3770 @ 1.30 Volts however is that it will run towards 90~95 Degrees C on your average heatpipe cooling. Anything under 90 Degrees C (with 100% CPU load) is a win here as it shows cooling capacity. It's the nature of the beast.
Let me clearly state that at 4600 MHz we do not require 1.30 Volts for a stable overclock, we are merely stressing the cooler to see how it behaves with extra voltage. Realistically with the TUF Sabertooth Z77 motherboard we are using 1.20V is enough for 4600 MHz. So again, we have increased CPU voltage beyond what we actually need. Okay, with that explained let's have a peek:
Core i7 3770K OC at 4600 MHz 1.2 Volts - IDLE
So first up some IDLE results with the Core i7 clocked at 3770K @ 4600 GHz with 1.2 volts on the CPU. Again, the results are the IDLE temperatures thus you are in your desktop doing nothing.
Core i7 3770K OC at 4600 MHz 1.2 Volts LOAD
Now we'll be testing the temperatures under stress. If we set the overclock at 4600 MHz and configure CPU Voltage at 1.2V, these will be the results.
As you can see the temperatures are bumped up higher quickly once you apply a Voltage tweak. Overclocked with 1.2 Volts we see some heatpipe coolers already run into problems. That Core i7 3770K is a seriously nasty product when v-tweaked.
My rule of thumb is simple, if the processor can stay under or at 75 Degrees for a long period of time, you should be okay. Optimal would be under 70 degrees C and really excellent cooling can keep it under 65 Degrees C.
The H90 stays well within what I consider to be great cooling, it is absolutely doing well at 65 degrees C. Now this overclock we consider to be a very realistic tweak, similar to what you guys achieve at home. But let's raise the bar higher, next page please.
Corsair H75 review In this review we test the Corsair H75 liquid cooler. The H75 features a 120 mm radiator that is a good 25mm but also was applied with two really silent low RPM fans, so you add this kit in a push-p...
Corsair H105 review We test and review the Corsair H105 liquid cooler. The H105 features a 240 mm radiator that is thicker then normal, with a 38 mm thickness. As comparison the H100 uses a 27mm tick radiator....
Corsair Obsidian 250D review We review a new chassis from Corsair, it is the Obsidian 250D. A small mITX form factor ready chassis that will house the smallest, but also the biggest stuff inside your OC. Not mid, not full, mini and this...
Corsair RM650 Watt Gold PSU review We review the Corsair RM650 GOLD power supply. Yes, the silent and a bit mainstream RM650 is now Gold certified, that means it's 90% efficient at 50% load. Efficiency matters. The PSU itself is partly modular, for most of you with a side panel window in their chassis a must really as you'll want modular cables. The new PSU also improved on the audibility front. Have a peek at the article.