Here we have the fan, 120mm and PWM base. A fairly good fan series with an RPM allowance of up-to 2000. The fan remains relatively silent under a default clock frequency of your processor.
When we flip it around we see the radiator a little better. Easy to mount, most big-tower chassis have pre-fitted holes and space for 120/240CM rads and fans. You could place it on the top side opf the chassis but the better location is the rear side 120mm fan mount. TIP, allow the air to be blown inwards and exhaust through the top of your chassis.
Above the colling block, and below when we flip the CPU cooling block/pump around we see an all copper base, with TIM (thermal grease) already applied for you. Not exactly a mirror / lapped finish though.
Wiring opposed to the H100i, is simple for the H60. Just one connector is leading outwards towards the motherboard to feed the pump. The fan you connect to a fan header on your mobo and that's it.
Corsair Gaming VOID RGB Dolby headset review We review the new Corsair Gaming VOID RGB wireless headset. The Dolby certified VOID is the successor model to the Vengeance series and works through a USB transmitter on the 2.4 GHz Wireless band.
Corsair Strafe Mechanical Keyboard review We review the all new Strafe, a cherry red mechanical keyboard that is not only affordable, it's quite customizable as well. The Strafe comes with Cherry key switches and red LED back-lighting, that ...
Corsair RM750i power supply review We review the Corsair RM750i GOLD power supply. This silent and a mainbe a bit mainstream RMi series PSU comes Gold certified, that means it's 90% efficient at 50% load. Efficiency matters. The PSU i...