HD Tach is a physical performance hard drive test that uses a special kernel mode VXD to get maximum accuracy by bypassing the file system.
The HD Tach sequential read test is a little bit different from other benchmarks. Most benchmarks create a file on the hard drive and test within that file. The problem is that modern hard drives use a zone bit recording technique that allows different read speeds depending on where the data is located. Data on the outside of the drive is much faster than data recorded on the inside.
With this test we NEVER reach advertised speeds, so please don't worry about that. It is the nature of the test, but the F120 is in the upper segment of performance, very nice.
When we look at write performance we still get close to 200 MB/sec in this test, and that's okay for this drive.
In addition to sequential read performance, HD Tach tests the drive's random access time. Random access is the true measure of seek speed. Many drives advertise sub 10 millisecond seek speeds, but seek speeds are misleading. Also again, without a physical head that needs moving around, the SSDs are just so fast as they have no mechanical moving parts. Here obviously .. the smaller number is better, 0.1 ms.
Corsair Gaming VOID RGB Dolby headset review We review the new Corsair Gaming VOID RGB wireless headset. The Dolby certified VOID is the successor model to the Vengeance series and works through a USB transmitter on the 2.4 GHz Wireless band.
Corsair Strafe Mechanical Keyboard review We review the all new Strafe, a cherry red mechanical keyboard that is not only affordable, it's quite customizable as well. The Strafe comes with Cherry key switches and red LED back-lighting, that ...
Corsair RM750i power supply review We review the Corsair RM750i GOLD power supply. This silent and a mainbe a bit mainstream RMi series PSU comes Gold certified, that means it's 90% efficient at 50% load. Efficiency matters. The PSU i...