So here is the phase where we slowly start assembling a test setup. First we mount the two fans to the radiator, four screws each. Please do apply the rubber cover which will greatly help you out against resonating, and thus result in better noise levels. Now for the photo that looks a bit blurry, I installed the rubber inserts so that the screws can not reach the radiator fins (to prevent damaging them and thus leakage).
Once done, you need to decide where you'll be positioning your radiator and how the tubing and wiring will be managed. As stated the pump comes with fittings, you can change out tubing, extend your loop or whatever. This also means that you can fill and empty the reservoir manually.
The two fans have connectors you can merge together with a y-splitter cable that is included and leads towards the PSU (Molex). There is one FAN lead left for the pump, it is indicating and labeled with 5V.
Cooler Master MasterCase 5 (Pro) review We review the new Cooler Master MasterCase 5 (Pro), a product series that is dsigned to mod and alter your chassis and transform it into something you make. The base chassis is just gorgeous to look ...
Cooler Master Nepton 240M review We test and review the all new Cooler Master Nepton 240M, an All-in-One Liquid cooler kit that is performing quite OK in a very saturated LCS kit market. Can it keep up with similar products? Let's f...
Cooler Master Cosmos SE review We review the new Cooler Master Cosmos SE. Based on the popular Cosmos design the more compact chassis now is available as an all black full tower, this chassis is just gorgeous to look at and has space for full size ATX motherboards, it comes with dark side panels and a whole lot of new innovations. Wanna have a peek ?
Cooler Master CM 690 III review We review the Cooler Master CM 690 III chassis, a new upgrade over the popular CM 690 II mid-towers. The looks might be the same, but every little mishap of the previous series has been upgraded and fixed including the interior.