Club3D Radeon HD 6870 X2 review
Posted by Hilbert Hagedoorn on: 07/07/2011 01:00 PM [ 0 comment(s) ]

Overall a good looking card, it's lengthy though, keep that in mind with a mid-size tower chassis. We measured it up and it's an all to familiar 30.5cm in length.
The backside of the product reveals the two GPUs. Make note of the one Crossfire connector, you could add a 3rd GPU for CrossfireX mode or even a second X2 of course. Driver compatibility wise we always recommend you to stick at two GPUs maximum, which this card already has.

Located at the upper backside we spot two 8-pin power connectors. This card only peaks at roughly 270~280W, so 75W is supplied through the PCIe slot, and the other 2x 150W through the two 8-pin PCIe PEG connectors. This card will offer nice performance per watt.
Your power supply will need two of these 8-pin connector leads, no 6 to 8-pin PEG converter cables are included

Here we removed the cooler. There are two separate radiators in there, both have three thick 8mm heatpipes in a direct touch configuration. That certainly is not a vapor chamber cooler alright.

And here a photo of the actual card with the cooler removed, nicely visible the two GPUs, in the middle is PCIe bridge chip from LUCID actually. The voltage regulation zone is nicely covered with a heatsink. here again you can see how lengthy the card really is.

Last photo, Club3D uses Elpida gDDR5 ICs. These are clocked in at 4200 MHz (quad data rate) but definitely have some more headroom in terms of overclocking, which we'll also show you later on.
We test and review the Club3D Radeon HD 7870 Joker, this is the much discussed 7870 card that in fact has a 7900 series GPU, the Tahiti LE. For a fair amount of money this series 7800 product now offers 7900 series performance. Armed with 2GB of graphics memory it hits a sweet spot gaming performance wise and to date it one of the more popular products in the mainstream segment. Let's check out the Club3D Radeon HD 7870 Joker.
Club3D Radeon HD 7790 Crossfire review
In this article test and review the Club3D Radeon HD 7790 Crossfire incl Frametimes. If you need a little more value for money then the 13 Series R7790 might be just what you are looking for. This card is all about saving money and costs roughly 130 EUR. Have peek at our review where we'll test the 13 Series from Club3D.
Club3D Radeon HD 7850 Royal Queen review
Club3D jumped the 7800 bandwagon as well with several models, and for this review we'll be looking at their Radeon HD 7850 Royal Queen edition which comes with 1 GB of graphics memory. The product comes default in many ways, except the cooler. Club3D uses a small PCB and pretty slim dual-slot cooler making the card very easy to install. The graphics card is equipped with one 6-pin PCIe power connector. As mentioned the card comes default/reference clocked at 860 MHz and the memory is clocked at a 4800 MHz reference as well.
Club3D Radeon HD 6870 X2 review
We review the Club3D Radeon HD 6870 X2. A dual-GPU Barts based graphics card. AMD had nothing to do with this design, this is a custom design product. Admittedly we just love that stuff. So we'll head over into the review, we'll cover a thing or two about BARTS based processors, have a closer look at the Club3D Radeon HD 6870 X2.
