As most of you know, with most video cards you can apply a simple series of tricks to boost the overall performance a little. Typically you can tweak on core clock frequencies and voltages.
What do we need? One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.
Where should we go? Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.
All in all... do it at your own risk.
Core Clock: 1000MHz
Core Clock: 1030MHz
Core Clock: 1200MHz
Boost Clock: 1000MHz
Boost Clock: 1030MHz
Boost Clock: 1200MHz
Memory Clock: 6000MHz
Memory Clock: 6000MHz
The R7790 is really fun to tweak and play with and you will not be disappointed by the results. Coming from a reference 1000 MHz, to 1033 MHz factory overclocked is already a bit of a bump. The reality is that we had it running stable at 1200 MHz with just a few tweaks:
You can use any tweak utility of preference of course, I'm just very handy with AfterBurner hence I use it all the time. But here's what you need to do:
Increase power limiter to 120%
Unfortunately we had no voltage control
Increase core clock frequency to 1200 MHz
You can leave the fan at default fan RPM
Memory Set to 6400 MHz
In total we just gained another 5~10% in performance. Have a peek at the results when overclocked. At this stage the cooler RPM was set at default which kept the noise levels under control at 40 DBa and thus at normal noise levels. We now have a hint extra performance at our hands on top of the factory overclock, have a peek at the results when overclocked.
For all overclocked games above we have used the very same image quality settings as shown before. Overall we have been able to get another 10% performance out of those graphics card.
Club3D Radeon HD 7870 Joker review We test and review the Club3D Radeon HD 7870 Joker, this is the much discussed 7870 card that in fact has a 7900 series GPU, the Tahiti LE. For a fair amount of money this series 7800 product now offers 7900 series performance. Armed with 2GB of graphics memory it hits a sweet spot gaming performance wise and to date it one of the more popular products in the mainstream segment. Let's check out the Club3D Radeon HD 7870 Joker.
Club3D Radeon HD 7790 Crossfire review In this article test and review the Club3D Radeon HD 7790 Crossfire incl Frametimes. If you need a little more value for money then the 13 Series R7790 might be just what you are looking for. This card is all about saving money and costs roughly 130 EUR. Have peek at our review where we'll test the 13 Series from Club3D.
Club3D Radeon HD 7850 Royal Queen review Club3D jumped the 7800 bandwagon as well with several models, and for this review we'll be looking at their Radeon HD 7850 Royal Queen edition which comes with 1 GB of graphics memory. The product comes default in many ways, except the cooler. Club3D uses a small PCB and pretty slim dual-slot cooler making the card very easy to install. The graphics card is equipped with one 6-pin PCIe power connector. As mentioned the card comes default/reference clocked at 860 MHz and the memory is clocked at a 4800 MHz reference as well.
Club3D Radeon HD 6870 X2 review We review the Club3D Radeon HD 6870 X2. A dual-GPU Barts based graphics card. AMD had nothing to do with this design, this is a custom design product. Admittedly we just love that stuff. So we'll head over into the review, we'll cover a thing or two about BARTS based processors, have a closer look at the Club3D Radeon HD 6870 X2.