ATI Radeon HD 4670 review -
13 - Radeon series 4600 Overclocking
Overclocking & Tweaking
As most of you with most videocards know, you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simple, tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need?
One of the best tools for overclocking NVIDIA and ATI videocards is our own Rivatuner which you can download here. If you own an ATI or NVIDIA graphics card then the manufacturer actually has very nice built in options for you that can be found in the display driver properties.
Where should we go ?
Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners not to increase the frequency any higher then 5% of the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you'd need to overclock today's tested card anyway, but we'll still show it ;)
All in all... do it at your own risk.
We started overclocking the card with the help of a new Rivatuner (beta version) which should be released real soon. As you know the standard clock frequencies for the GPU and memory are 750 MHz and 2000 MHz respectively.
Fairly easily we were able to push the core towards 813 MHz and the memory towards 2450 MHz (effective).
As you can see, the result yielded a faster performing card mainly thanks to that additional memory bandwidth we created. The game you are looking at is Mass Effect with maximum in-game quality settings enabled. Everything is maxed out, no AA though (not supported in-game), the noise filter however is enabled.
This really is a worthwhile 15 to 20% overclock.
But please, don't over-do your tweaks though, and be careful.
Today we have another bang for buck product, a product that I like very much. As what ATI is doing today is pretty remarkable. They are releasing the Radeon HD 4770, a mainstream product at a budget price. Trust me when I say that after reading this review, you will be impressed.
ATI Radeon HD 4550 512MB review
Today we test the Radeon HD 4550. It's the cheapest desktop graphics product that ATI can deliver at your doorsteps. This Radeon HD 4550 (GPU codename RV710XT) comes with an optional 256 MB GDDR2 or optional 512MB GDDR3 and will cost you .. 45 to 55 USD respectively.
AMD ATI Radeon HD 4870 1024MB review
Today a test and review on the new AMD ATI Radeon HD 4870 1024MB. Obviously ATI is releasing a 1GB model to compete with the new Core 216 version of that GeForce GTX 260. The 4870 series really diggs that GDDR5 memory bandwidth, and what's the cheapest thing to do to gain some extra performance ? Increase the framebuffer volume. Now that by itself is not going to work miracles, yet in memory limited situations (loads of high quality textures, filtering and AA modes) it will help you here and there. And a little bit of extra bite is all the product needs to get beat that Core 216 card again.
ATI Radeon HD 4670 review
We test the ATI Radeon HD 4670. A nice little card that packs some decent punch in the value minded consumers.