ASUS Sabertooth Z77 review -
Intel Z77 PCH - The Platform Controller Hub
Intel Z77 PCH - The Platform Controller Hub
Paired with the new Ivy bridge processors comes new motherboard chipsets, eleven in total of which six are intended for desktop processors, namely the H77, Z75, Z77, B758, Q75 and Q77.
For end consumers like you and me the H77 chipset will be less performance targeted and comes with support for monitor connectivity. The Z77 chipset is targeted at performance and enthusiast end users allowing much more tweaking and providing performance features.
Important note: most Series 6 motherboards will support Ivy bridge processors! All you need is a BIOS update with support from your motherboard manufacturer. Obviously features like PCIe Gen 3 and native USB support will not kick in.
Below you can see a block table with the differences in chipset and thus motherboards.
In-between say a Z68 and Z77 chipset only a few things have changed. Native USB 3.0 support is to be found at the Z77 chipset, and then PCEI Gen 3 graphics slots.
The new Z77 series chipsets will come with the same amount of SATA2 and 3 controllers as P67/Z68. That means you get four SATA2 ports and another two SATA3 ports native from the Z77 PCH chip.
With PCIe Gen 3 SLI and Crossfire with supported cards should run quite well on them.
More PCIe lanes
The one thing that people grumble about the most with P67/Z68 is the relatively small number of available PCIe lanes (16) for graphics cards. That's fixed on Z77 with PCIe Gen 3.0. Ivy Bridge processors feature 16 PCIe 3.0 lanes to be used for graphics and/or other add-in PCI cards. All consumer chipsets support a single PCIe x16 device, while the two Z7x chipsets add the option to use two devices at x8. On Z77 boards there is also the option of using one device at x8 and two more devices at x4 speeds. So you get a full 3.0 x16 lane or two 3.0 x8 lanes. Remember, a x8 lane is in fact a PCIe gen 2.0 x16 lane. You can also split them in x8 and two x4 gen 3.0 lanes.
So if you are using a setup with two or more graphics cards (SLI/Crossfire), the PCIe bandwidth is more then plentiful.
PCIe gen 3.0
The inclusion of PCI Express Gen 3 is great, but what does that boil down to? Well simply put, PCI Express Gen 3 provides a 2X faster transfer rate than the previous generation, this delivers capabilities for next generation extreme gaming solutions.
PCI Express Gen 3 has twice the available bandwidth, 32GB/s, improved efficiency and compatibility and as such it will offer better performance for current and next gen PCI Express cards. Going from PCIe Gen 2 to Gen 3 doubles the bandwidth available to the add-on cards installed, from 500MB/s per lane to 1GB/s per lane.
So a Gen 3 PCI Express x16 slot is capable of offering 16GB/s (or 128Gbit/s) of bandwidth in each direction. That results in 32GB/sec bi-directional bandwidth. Obviously your hardware used needs to be compatible.
LGA 1155 - Socket Compatibility
With Sandy Bridge we moved to socket LGA 1155 and for Ivy Bridge we remain at that socket. That's good news as we can use the processor on the series 6 chipset as well as the new series 7 chipset.
We stated this already, but chances are pretty good that your (say) Z68 motherboard will get a BIOS update, making Ivy Bridge processors run 100% on your motherboard. That's good news if you like to save some money. Be aware though though that you would loose PCIe Gen 3 and native USB 3.0 connectivity. However chances are pretty good that you do not need PCie Gen 3.0 just yet and that your motherboard supports USB 3.0 by way with a 3rd party controller. Then you are set to go.
There's another advantage of the socket compatibility, you do not need to purchase a new CPU cooler.
it should be abundantly clear by now but USB 3.0 is finally supported at chipset level by Intel. Which should save motherboard vendors money when building Intel chipsets and hopefully make the boards overall less complicated to design. In addition to that, we will hopefully see better USB 3.0 performance. The chipset will host 4 USB 3.0 ports. Next to that 10 USB 2.0 ports are supported from the PCH.
We review, test and benchmark the ASUS Sabertooth Z87 TUF series motherboard. The Z87 enthusiast themed mainboard is intended for Intel's 22nm Haswell processors on Socket LGA1150.
ASUS Sabertooth Z77 review
We review the ASUS Sabertooth Z77. Z77 is of course the Intel chipset predominantly released for Ivy Bridge based processors. This article is a full review of what you may expect from the TUF series Sabertooth Z77, have peek after which we'll dive right into the photo shoot.
ASUS Sabertooth Z77 preview
We preview the ASUS Sabertooth Z77 TUF. Z77 is of course the Intel chipset for the upcoming Ivy bridge based processors. These motherboards will have a slightly altered feature set and thus support them new upcoming apples from Intel. Good to know however is that Z77 also supports Sandy Bridge Socket 1155 based processors, that's right your favorite Core i5 2500K and Core i7 2600K will be perfect for these motherboards as well. The changes for Z77 primarily can be found in native USB 3.0 support as well as an upgrade towards PCie gen 3 PCIe x16 slots.
ASUS Sabertooth 990FX review
The TUF series (The Ultimate Force) Sabertooth 990FX is what we'll be placing under our microscope today, styled in the very same color as the earlier models with the ceramic design we see a lot of resemblances. But hey no tactical jacket anymore though. This AM3+ motherboard will be powered by a 10-phase Digi+ VRM. Socket AM3+ will support the Bulldozer based Zambezi FX Series Processors which launch later. The Sabertooth 990FX will come with four DDR3 DIMM slots supporting dual-channel memory up-to DDR3-1866 MHz straight from the EFI BIOS. What you'll also notice is that the TUF (The Ultimate Series) has four PCI-Express 2.0 x16 PCIe graphics card slots based on what you use the slots for of course. Interesting fact is that this motherboard series now is SLI compatible.