Albatron 680i SLI mainboard review -
Remember that I told you that the platform will have two 1Gbit/s NICs? NVIDIA calls this DualNet.
You can now bridge the two together, NVIDIA calls this "Teaming". Basically both NICs will work as one 2 GBit/s controller and it actually works pretty darn good. You simply hook up both connections to a switch and in the CP (Control panel) enable Network Teaming, which binds the two NIC's as one.
I once witnessed a test of this: the main (and thus "teamed") PC was functioning as a server, and from 6 other clients, massive amounts of data were sent bi-directionally. Extremely impressive as the network speed indeed neared 2GBit/sec. Teaming also provides network redundancy through fail-over capability. By hooking up Ethernet connections to both gigabit ports, not only is performance increased by combining the two pipes, but the network is immediately sheltered against a port or cable malfunction (such as a network wire getting kicked loose.) Another great thing I just have to mention has to be the TCP/IP engine which now also runs over the nForce chipset. The trick here is that it offloads your CPU. During massive amounts of data transport very little processor time is being utilized.
Good stuff for sure, NVIDIA calls this TCP/IP Acceleration engine. See an example below.
Another feature I would like to mention network wise is FirstPacket. A pretty interesting and underestimated feature, especially for gamers. When you are playing on-line / or in LAN or hey ... what about VOIP ? Don't you hate it that you for example can't have any other outbound traffic from for example an FTP or Bittorrent client for all I care? Doesn't your ping time go AWOL? Yes, outbound traffic will kill off your ping times making it barely impossible to play on-line very well.
This is where NVIDIA FirstPacket comes in. At the NVIDIA control panel you can now prioritize your network traffic. So if you set a game like Serious Sam 2 with higher priority your ping times will remain fantastic as all other traffic will be lower in the data packet queue. Let me show you:
So, I had to scale down the screenshots. But above you see Serious Sam 2 running in an window. it's in multiplayer mode over the internet connected to another server. Now, to your lower right you see an active FTP session. With Firstpacket disabled our ping make the game practically unplayable with pings rising to 400-500 ms. With Firstpacket enabled as you can see that ping went down again. BTW, it's still a little high ping but the server I was connected to was not very close. Pretty impressive stuff as the options here are unlimited. Prioritize Voice over IP, or what about file-sharing clients during gameplay or whatever.
Integrated audio. And it's not even half bad. NVIDIA ripped out the AC-97 based audio support in their chipsets. Similar to the nForce 500 lineup, the nForce 600 series will offer full support for the various "Azalia" based High Definition Audio codecs. While the choice of which HDA codec along with the associated circuitry can still greatly impact audio quality and performance as it's not exactly an X-Fi or Auzentech X-Meridian. The Azalia HD codec's are still lot's better than the AC-97 solutions as previously offered.
nTune serires 5.0 has been launched recently. First let me say that the entire NVIDIA control panel had an overhaul. EVERYTHING that needs to be monitored or setup AND is an NVIDIA product, can be adjusted through the new control panel. We'll show you a couple of pictures in a minute. First nTune.
For those that don't know it, nTune is a tool for NFORCE based mainboards only and offer a very large set of features in the form of system tuning and monitoring your hardware. So with NVIDIA nTune your system can automatically adjust to maximum performance settings or even vice versa ... it can actually detect that youve inserted a DVD and will set the system to quiet operation. This nTune series software offers through the windows GUI the option to change bus speeds, memory timings, and even tweak voltages. Changes are made easily within a simple-to-use Windows interface and thus you no longer need to make changes to the BIOS, or for that matter reboot your system as the GUI application can access BIOS settings directly from Windows. It's all done on the fly. There's some new stuff in there that you must check out, like dynamically load saved settings for different performance states. For example if you startup notepad and continue to work in it your system could be down clocked based on a set of rules that you define. Everything is regulated by you and can be monitored, which includes voltages and bus speeds for the SPP and MCP chip, GPU(s), CPU core, memory and even HT link.
It's a little too abstract to explain, yet the true geeks will love this stuff for sure. But I do believe that the true tweakers will continue to tweak from the BIOS.
One of the most popular cards is the GeForce 8800 GTS 512MB version, and guess what .. Albatron just released theirs. Time for another Guru3D review !
Albatron 680i SLI mainboard review
The Albatron nForce based 680i SLI even since it's release is an amazing mainboard series. It's simple .. if you want to overclock your PC, chances are large that you at the very least are opting a 680i mainboard with Core 2 Duo processor and some good memory.
Albatron K8SLI mainboard
Albatron decided toe ease the pain a little. They introduced a mainstream SLI mainboard based on the NFORCE 4 SLI chipset that is quite affordable and offers a more than enough of functionality versus excellent performance. Being an affordable mainboard costs can be cut a little. Next to that one of my personal wishes finally was introduced .. as stated you need to enable SLI mode on the mainboard if you are using two GeForce graphics card in a SLI setup, which normally can be done with that little SLI card that sits securely on your mainboard and needs to be be flipped around. Some manufacturers ditched that SLI card and allow that change from the BIOS or even automatically. Albatron is such a company, and this mainboard has a digital switch, you seriously don't have to do a thing. Lovin' it!
Albatron PC6800 - Wise Fan III + Heat Pipe
When I was at the CeBIT 2005 earlier this year, a couple of things caught my attention, and I'm not 'just' talking about the beautiful booth babes here. We see a new trend in the industry, product differentiation , set yourself on another spot in the market to get more reputation and expand your diversity. Albatron, a good partner for Guru3D.com, has always been a trendsetter in that respect. This year when I walked by their booth something caught my attention. A GeForce 6800 with passive cooling ... yet it was not 100% passive. Weird yes ? Basically two cooling technologies combined.