Teamgroup T-Force Night Hawk 3000 MHz 16GB Dual Channel DDR4 memory review

Memory (DDR4/DDR5) and Storage (SSD/NVMe) 367 Page 2 of 13 Published by

teaser

Specifications and Features

Teamgroup T-Force Night Hawk 3000 MHz (8GBx2)

So the memory kit tested today comes from that Teamgroup T-Force series armed with the very best ICs all packed nicely under heat spreader design of the DIMM module. First things first, this kit is specifically optimized for 6th and 7th Gen Intel Core processors (Skylake / Broadwell-E) and the X99 / Z170 chipset. 

  • Optimized for the latest 5th / 6th Generation Intel Core Processors and X99 / Z170 chipsets
  • Two matched 8GB modules, designed for use in a dual or quad channel setup
  • 3000 MHz memory speed with full memory timings of CL 16-18-18-38-2N at 1.35V
  • Black colour heatsinks with LED (red) animation (breathing).
  • Hawk wings symmetric type heat spreader
  • Unique hawk-eyes light guide panel design
  • High-efficiency aluminum heat spreader
  • LED breathing light
  • 10 layers of circuit board
  • Selected high quality IC chips
  • 1.2V~1.4V ultra low working voltage
  • Supports XMP2.0 one click overclocking technology
  • QVL approved by mainstream motherboard manufactures in the market
  • Lifetime warranty

The flagship of the Night Hawk series actually clocks in at a rate of up-to even 3200 MHz these days, we'll do just fine with the 3000 MHz CL16 kit though, as well as memory voltage of 1.35 volts for that 3200 MHz. 

Product Specifications

Img_5294
Module Type

288 Pin Unbuffered DIMM Non ECC

Capacity

8GBx2 / 16GBx2

Frequency 2666 2800 3000 3200
Data transfer bandwidth

21,300 MB/s
(PC4 21300)

22,400 MB/s
(PC4 22400)

24,000 MB/s
(PC4 24000)

25,600 MB/s
(PC4 25600)

CL-Value CL15-17-17-35 CL16-18-18-38
Voltage 1.2V 1.35V
Heat Sink Aluminum heat-sink
Operation System

Desktop or notebook computer with DDR4 Memory Slots
Required OS : Windows 10 / 8.1 / 8 / 7 / Vista / XP

Warranty Lifetime Warranty


DDR4 entry-level SKUs are clocked at 2133 MHz, but often with better access times and 2133 MHz runs at stock 1.2 volts which is also a tad lower. Pricing wise you can spot this 16 GB kit for € 100~125,-. The modules are equipped with the Hawk wings heatspreader. Once installed in the BIOS if supported, select the XMP profile for the memory and after a reboot you are good to go -- really it's that simple.  If you do not have an XMP profile option in your BIOS, set the timings manually and set DIMM voltage a little higher to 1.35V opposed to an SPD 2133 MHZ config with 1.2 Volts. But head on over to the next page where we'll startup a product photo-shoot after which this article will dive into a benchmark session. Hey, we know you like it like that!

Share this content
Twitter Facebook Reddit WhatsApp Email Print