Phenom II X4 975 Black Edition review

Processors 199 Page 5 of 17 Published by

teaser

Overclocking Phenom II

Overclocking Phenom II X4

If you decide to start an overclocking session with the Phenom II processors, typically you are much better off with the BE versions (CPU multiplier unlocked).

So lets focus on the overclock is the Phenom II X4 975 BE. This processor has an unlocked multiplier. We now can overclock in several ways, modern motherboards often have automated overclock features... in the case of the ASUS motherboard we can flick a setting in the BIOS and after seconds it's already running at 3.8 GHz.

Alternatively you can use AMD's Windows compatible OverDrive interface that allows for very easy overclocking of the Phenom II processor. The latest revision is one of the best CPU tweak utilities out there.

For this review we used the latest version (3.2.3) which has some cool new options.

AMD Phenom II X6In AMD OverDrive you can simply max out the CPU voltage towards ~1.55V and increase the multiplier. Play around with it; don't be afraid of a crash. Now what you can do best with AMD OverDrive is determine how high you can overclock and then transfer the final stable settings into the bios to make it permanent (if you would to of course).

Regardless of the coolness that is AMD OverDrive, we however overclocked manually through the BIOS -- the results were really dandy as we took it to 4 GHz quite easily -- and again, this overclock was managed with a simple OCZ Vendetta air-cooler. You can click on the screenshot to the right for a large version.

Here's an overclock at 4324 MHz 100% stable. We boosted Voltage towards 1.55v in the BIOS and simply applied a multiplier of 21 versus a small bus speed increase of 205 MHz. Temperatures are now much higher, but really acceptable. Again, and I can't stress this enough -- we are only using a 35 USD air based Vendetta cooler here, nothing fancy.

One word of advice, AMD processors start to really consume a lot of power once you overclock them. At 4300 MHz (all cores stressed) we consumed 289 Watts (peak).

Share this content
Twitter Facebook Reddit WhatsApp Email Print