We'll now look at the reference (original design) based specs and architecture. The GeForce GTX 670 is based on the new Kepler GPU architecture. It is based on the very same 28nm GK104 GPU which is used on the GeForce GTX 680.
The GeForce GTX 670 boasts 1344 CUDA (shader) cores whereas the GeForce GTX 680 has 1536 CUDA (shader) cores. That's 192 Shader cores less, and that's precisely one CUDA core clusters (SM) less out of the eight available.
The product is obviously PCI-Express 3.0 ready and has a TDP of around 170 Watt (with a typical draw of 150~160W). But let me first show you GK104 die:
NVIDIA GK104 Kepler architecture GPU, you can see the eight SM (CUDA/shader core) clusters, one of these has been deactivated for the GTX 670.
An immediate difference to the GPU core versus the shader processor domain is that both will be clocked at 1:1, meaning both the core and shader domain clock in at 915 MHz. The boost clock for the reference GTX 670 cards is set at 980 MHz though that can vary a bit per card and available power envelope (topping 1 GHz would not surprise me).
As far as the memory specs of the GK104 Kepler GPU are concerned, the boards will feature a 256-bit memory bus connected to 2 GB of GDDR5 video buffer memory. On the memory controller side of things you'll see very significant improvements as the reference memory clock is set at 6 GHz / Gbps. This boils down to to a memory bandwidth of 192 GB/s on that 256-bit memory bus.
With this release, NVIDIA now has the third product in the series 600 cards on its way. The new graphics adapters are of course DirectX 11.1 ready. With Windows 8, 7 and Vista also being DX11 ready all we need are more new games to take advantage of DirectCompute, multi-threading, hardware tessellation and the latest shader 5.0 extensions.
For your reference here's a quick overview of some past generation high-end GeForce cards opposed to the new Kepler based GeForce GTX 680.
GeForce GTX 480
GeForce GTX 580
GeForce GTX 670
Palit GTX 670 Jets.
GeForce GTX 680
GeForce GTX 690
Stream (Shader) Processors
Core Clock (MHz)
Shader Clock (MHz)
Boost clock (Mhz)
Memory Clock (effective MHz)
For Kepler, NVIDIA kept their memory controllers GDDR5 compatible. Memory wise NVIDIA has nice large memory volumes due to their architecture, we pass 2 GB as standard these days for most of NVIDIA's series 600 graphics cards in the high range spectrum.
The hardware engineers of NVIDIA reworked the memory sub system quite a bit, enabling much higher memory clock frequency speeds compared to previous generation GeForce GPUs. The result is this: memory speeds up-to 6 Gbps. Each memory partition utilizes one memory controller on the respective GPU, which will get 256/512 MB of memory tied to it.
The GTX 580 has six memory controllers (6x256MB) = 1536 MB of GDDR5 memory
The GTX 670 has four memory controllers (4x512MB) = 2048 MB of GDDR5 memory
The GTX 680 has four memory controllers (4x512MB) = 2048 MB of GDDR5 memory
As mentioned in the introduction, a 4 GB version would be very possible as well.
Palit GeForce GTX 980 Super Jetstream review We review one of the fastest GeForce GTX 980 cards from Palit, the Super Jetstream edition. It comes all customized, has an improved Jetstream series cooler and runs factory tweaked at clock frequenci...
Palit GeForce GTX 970 Jetstream review Palit is back in the house as we review their GeForce GTX 970 Jetstream edition. The product comes factory overclocked with a boost clock of 1304 MHz. The product has a custom and very small PCB, it'...
Palit GeForce GTX 750 Ti KalmX review In this review we take the Palit GeForce GTX 750 Ti KalmX. Palit's offering is the most slinet of them all, as it uses passive cooling. That's right, just a big heatsink is being used. The KalmX ru...
Palit GeForce GTX 750 Ti StormX Dual review In this review we take the Palit GeForce GTX 750 Ti StormX Dual for a test-drive. Palit's offering is the fastest GTX 750 Ti we have seen to date as it has been factory overclocked intensely on the G...