OCZ ARC 100 Series SSD review

Memory (DDR4/DDR5) and Storage (SSD/NVMe) 368 Page 4 of 20 Published by

teaser

Product Showcase

Product showcase

The following images were taken at high-resolution and then cropped and scaled down. The camera used was a Canon DSLR shooting 12 MegaPixel photos. Right then, below is the packaging. The sample OCZ submitted comes as a 240 GB package. Performance is listed at a maximum of 480 MB/s read and 430 MB/s writes with 80,000 IOPS at 4k random write aligned disk access with our tested model.
 

Img_9947


This is the 2.5" SATA III 120 GB version all packaged up in the bundle. You should easily be able to place it somewhere in your chassis. Small and light-weight. The SSD supports TRIM making sure your SSD will regain its speed once in idle. Obviously you do need to connect it to a proper SATA 3 (6G) controller though, the best ones can be found on the Intel series 6 and 7, 8 and 9 chipset based products. We also find the latest AMD FM2 based chipsets to perform well. Included in the bundle is a manual, some screws and one shiny SSD. 

OCZ is not including a 3.5" mounting bracket and the Acronis backup disk clone software, all left out to keep the overall pricing of the product down. 


Img_9948


The SSD actually feels a little heavy due to the housing. When we look at the connectors, we spot the standard power and Serial ATA connectors. This drive is SATA3 (6G). Obviously the drives are backwards compatible towards SATA2 as well, but the bandwidth limitation there would be capped to roughly 270 MB/sec (which still is silly fast compared to HDDs).

 

Img_9949


A proper SATA 6G cable is recommended and should be delivered with your motherboard. We however never ever had issues with a standard older SATA2 cable either. It seems that SATA3 cables are a little thicker, that's all. The casing of the SSD is made out of metal, great for shielding. It does make the SSD rather heavy though. But let's rip her open.

Share this content
Twitter Facebook Reddit WhatsApp Email Print