OCZ Agility 3 SSD review

Memory (DDR4/DDR5) and Storage (SSD/NVMe) 366 Page 12 of 15 Published by

teaser

SSD Performance HD Tach 3.0.4.0

 

HD Tach

HD Tach is a physical performance hard drive test that uses a special kernel mode VXD to get maximum accuracy by bypassing the file system.

The HD Tach sequential read test is a little bit different from other benchmarks. Most benchmarks create a file on the hard drive and test within that file. The problem is that modern hard drives use a zone bit recording technique that allows different read speeds depending on where the data is located. Data on the outside of the drive is much faster than data recorded on the inside.

When we look at write performance we see 347 MB/sec in this test, and that's surely okay for this drive.

In addition to sequential read performance, HD Tach tests the drive's random access time. Random access is the true measure of seek speed. Many drives advertise sub 10 millisecond seek speeds, but seek speeds are misleading. Also again, without a physical head that moves around, the SSDs are just so fast as they have no mechanical moving parts. Here obviously, the smaller the number is, the better. In this case, 0.1 ms.

The Burst speed measured in HD Tach was 352 MB/sec by the way. Check the test result here.

Share this content
Twitter Facebook Reddit WhatsApp Email Print