Product gallery

 
On the rear left, we spot another fan, obviously the rear exhaust fan which is a 140 mm fan. NZXT uses black cabling for the fans and wiring overall. The fans all have been pre-connected to the CAM compatible controller unit, which is lovely and tidy. At the top, you can see a LED strip, also pre-applied and connected to the controller. Basically, the controller unit needs power from SATA, a USB connector to the mobo and a system with the latest CAM software installed to be able to control LEDs and fans.

 
And all the way down, the power supply compartment (which is huge in length). On top sit two SSD trays. If you do not like that position, you can move them to the backside of the motherboard tray, we'll show you that on the next pages. The chassis has 7 PCI slots. 

As shown on the previous page, at the top of the PSU you can mount two SSDs, unfortunately, they do not look nice there. I'd advise them to move them to the backside. 

The front side holds 3x 120mm fans, again all connected for you already to the CAM controller. At the front, you may mount 2x 140 or 3x 120mm with Push/Pull. Here you can also see the white insert better, it's done as aesthetic design features as well as it will hide your cables coming from the motherboard like the ATX power cable for example.