MSI Radeon HD 7870 HAWK review

Graphics cards 1047 Page 23 of 24 Published by

teaser

Overclocking the Radeon HD 7870

 

Overclocking The Radeon HD 7870

As most of you know, with most videocards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply to tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.

What do we need?One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.

Where should we go?
Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.

More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.

All in all... do it at your own risk.

The Radeon HD 7870

Original This sample Overclocked
Core Clock: 1000 MHz Core Clock: 1100 MHz Core Clock: 1300 MHz
Shader Clock: 1000 MHz Shader Clock: 1100 MHz Shader Clock: 1300 MHz
Memory Clock: 4800 MHz Memory Clock: 4800 MHz Memory Clock: 5800 MHz

For the MSi R7870 HAWK we open up AfterBurner and free the card up from TDP restrictions first, so all the way up moves the Power Control settings slider towards 20%.

Overclocking wise the card will allow itself to be clocked to roughly 1300 MHz on the core easily and that's with a tiny bit of voltage tweaking (1.25V on the GPU). We were actually able to push the card towards a nice 1300 MHz on the GPU core. Memory can be boosted as well, just max it out at 5800 MHz.

If you apply a little extra voltage with Afterburner, then put it at roughly 1250Mv... don't overdo it. We left fan RPM at default regulation, during stress tests the temperature now can rise towards 76 Degrees C. Once you pass 70 Degrees C the fans become much more noisy though. So you'll lose the silence factor -- that's the tradeoff.

Below, are some numbers based on the overclock we were able to pull off. The card is very flexible in terms of overclocking alright. Granted, the entire Radeon HD 7000 series is a gem when it comes to tweaking and the HAWK just upped it a notch.

 

MSI R7870 HAWK

Above, Crysis 2, same maxed out image quality settings as before yet now with added overclock results:

  • DirectX 11
  • High Resolution Texture Pack
  • Ultra Quality settings
  • 4x AA
  • Level - Times Square (2 minute custom time demo)

MSI R7870 HAWK

MSI R7870 HAWK

Above, 3DMark 11 - the Performance test and score. As you can see, there is an additional bump in this very GPU limited software, lovely.

MSI R7870 HAWK

Above, Alien versus Predator, at 1920x1200 with 4x AA and 16X Anisotropic Filtering.

Share this content
Twitter Facebook Reddit WhatsApp Email Print