Product Gallery
Now we apply new thermal paste (TIM) on the GPU, smear it out until you have a very thin layer of TIM on these components.
The LCS VGA block has thermal pads pre applied, remove the protective cover like shown above. All important areas are covered including memory, I/O and VRMs.
We now insert the studs into the mounting holes. Now leave the VGA block on its back and position the graphics card PCB over it, align the holes with the studs.
Once you pushed down the PCB and had a visual peek of that GPU making proper contact with the cooler we can secure the VGA block with several mounting screws, secure them tightly.