Heatpipe CPU cooler roundup review

Cooling 189 Page 2 of 9 Published by

teaser

2 - Heatpipe cooling 101

Alright .. let's begin with a little Heatpipe cooling 101

A new trend that started over the past two years is heatpipe based cooling. Several advantages directly come to mind as the principle behind heatpipe cooling is quite simple. You move heat towards another spot other than the source. That way you can get rid of that heat not directly away from that source, yet effectively can cool it down optimally on location B. This means less resources and effort is needed at the original point of heat. The less resources I'm talking about is a direct active form of heat dissipation e.g. loud fans. More cooling these days equals more noise, and don't we all hate it ?

So here we are establishing the logic behind heatpipe based cooling. Basically if you won't go too crazy on the CPU, with the help of a good heatpipe design you could actually passively cool a processor, which in the end ensures you a silent PC. And that's what it's really about. Optimal cooling versus the noise your PC makes. PC's have become a small oven, you can literally fry an egg on your CPU when it's idling (with no cooling). You are playing a game and you are utilizing 200 to maybe 400 watts throughout your PC, and that my friends generates heat.

High cooling performance and silence didn't belong in the same sentence. If people want performance, they usually needed to buy a cooler that would either create a Tornado in their case, and most probably sound like a jet airplane getting ready to take off. However, this is now a thing of the past, since companies are now finally trying to make coolers that offer both high performance and are silent down to the level of actually letting a user sleep in the same room with that mini tornado rig of his or hers.

This is where heatpipe based cooling kicks in really well.

Believe it or not but the technology of heatpipe cooling is somewhat based on what we see in a 'refrigerator'. Refrigeration and phase changer coolers. When you look closely at the the cooler you'll see copper pipes and cooling ribbons. An internal coolant is inside these pipes and flows from the chamber upwards towards the cooling ribbons where heat will be dissipated with the help of airflow. The cooling method is all based around circulation. Although we just named it gas it's initial cold state is typically fluid like state. That coolant is unusual in that it has a very low boiling point well below 0°C at atmospheric pressure and a freezing point more than 100°C below zero. It is liquid when cold but easily becomes a vapor when heated and vice versa. By absorbing heat from the processor, the fluid will dissolve and form into gas which travels towards the top of the pipes where heat will follow the path of least resistance, to the aluminum fins.

Now there are lot's of heatpipe coolers, the cheaper ones don't have coolant at all and just use gas or even air to transport that heat but the idea of heatpipe based cooling covered in one line is: to move heat from point A to point B as efficient as possible. So the cooling block mounted on your CPU absorbs whatever heat energy is available to it then that heat transports trough the heatpipes to the our rims of the fins where it'll dissipate.

Our test environment:

We decided to do things a little different this time. All these coolers will work fine under normal circumstances so we figured, let's fire off a difficult environment at it.

All coolers today will be tested 'outside' a chassis. Meaning no airflow. Secondly we fire off high-end gear at it, let me show you what we used:

  • nForce 780i Ultra SLI
  • Core 2 Quad Q6600 overclocked to 3600 MHz
  • DDR2 800 MHz

Now the culprit here is our 3600 MHz overclock. This will under any circumstance make temperature more hefty on the cooler.

Once we established the overclock, we started mounting the coolers and each cooler will be tested under four conditions. With, and without a fan and as secondary load test, the PC in IDLE and at 100% CPU load on all four CPU cores with the help of the Prime95 load tester.

Remember, only one of the coolers tested today is intended for passive cooling (no fan) the others are not specced for that. That fact in combo with the hefty overclock is a really extreme stresser.

We do have a fail-safe .. the PC will automatically shut down once the CPU reaches 80 degrees C, so after 80 degrees C we can and will not measure, otherwise we risk toasting out processor.

And for your reference we tested at a constant 20 degrees C room temperature. Now for all coolers we created the same circumstances, same voltages, same environment, same ambient temperature. We also used and applied thermal paste on each run. We used one brand thermal paste, the same brand for all coolers.

CPU Heatpipe coolers 2008

Yeah, this test requires a bit of Thermal paste, we used TX-2 from Tuniq, works great and not too expensive either. Anyway, we'll now quickly browse through the products tested guided with some photo's after which we'll move onwards into the actual test.

Share this content
Twitter Facebook Reddit WhatsApp Email Print