Gigabyte GeForce GTX 580 SO review

Graphics cards 1048 Page 20 of 21 Published by

teaser

Graphics card Overclocking

 

Graphics card Overclocking

As most of you know, with most videocards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply to tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.

What do we need?One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.

Where should we go?
Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.

More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.

All in all... do it at your own risk.

Original This sample Overclocked
Core Clock: 772MHz Core Clock: 855MHz Core Clock: 961MHz
Shader Clock: 1544MHz Shader Clock:1710MHz Shader Clock: 1922MHz
Memory Clock: 4000MHz Memory Clock:4100MHz Memory Clock: 5000MHz

Overclocking wise the GTX 580 SOC will allow to be clocked to roughly 875~900 MHz on the core without voltage tweaking. But if you purchase a card like this, we doubt that you won't be tweaking the living bejezus out of it. So we applied a shy GPU voltage of 1.15v after which your overclocking experience will increase immediately.

We reached a stable 961 MHz on the core but it did have some leash left. Tweak a little more precise and the 1 GHz barrier will become an option. The downside of the voltage tweak however is a louder (42 DBa) graphics card as it will need to deal with more residual heat. Power consumption also jumped up another 45 Watt, but fair enough if you compare a reference card at 772 MHz and take that close to 1 GHz, there's bound to be compromises to be made. With the voltage tweak and above clock frequencies the GPU under massive stress now jumps towards a 72 Degrees C temperature, but that's still excellent considering our overclock.

Anyway here's what that does towards overall game performance, the GTX 500 series really likes overclocking and that shows in the numbers.

Above, COD MWF2, maxed out image quality settings as before with 4xAA. With so much GPU power requested by the game, we can actually measure the overclock pretty well.

Above, Battlefield Bad Company 2, maxed out image quality settings as before with 8xAA 16xAF. Here up-to 1920x1200 we run into massive CPU limitation. Once you are freed from that, performance boosts upwards alright.

Above, 3DMark 11 - the Performance test and score. As you can see a nice additional bump in this very GPU limiting title, lovely.

Share this content
Twitter Facebook Reddit WhatsApp Email Print