Gigabyte GA-MA770T-UD3P motherboard review

Mainboards 327 Page 3 of 17 Published by

teaser

Specifications

 

Now that's a good package to have, let's scrawl through the features and specifications after which we'll fire up the photo-shoot and guide you through this product.

Specifications
CPU
  1. Support for AM3/ AM2+/ AM2 processors (Note1): AMD Phenom II X4 processor/ AMD Phenom II X3 processor/ AMD Phenom FX processor/ AMD Phenom X4 processor/ AMD Phenom X3 processor/ AMD Athlon X2 processor/ AMD Athlon processor/ AMD Sempron X2 processor/ AMD Sempronprocessor
Chipset
  1. North Bridge: AMD 770
  2. South Bridge: AMD SB710
Memory
  1. 4 x 1.8V DDR3 DIMM sockets supporting up to 16 GB of system memory
  2. Dual channel memory architecture
  3. Support for DDR3 1666/1333/1066  memory modules
  4. Support ECC memory (Note 4)
Audio
  1. Realtek ALC888 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF In/Out
  5. Support for CD In
LAN
  1. Realtek 8111C/D(L) chip (10/100/1000 Mbit)
Expansion Slots
  1. 1 x PCI Express x16 slot, running at x16 (PCIE_16)
    (The PCI Express x16 slot conforms to PCI Express 2.0 standard.)
  2. 4 x PCI Express x1 slots
  3. 2 x PCI slots
Storage Interface South Bridge:
  1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
  2. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
  3. Support for SATA RAID 0, RAID 1 and RAID 0+1

iTE IT8720 chip:

  1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394 T.I. TSB43AB23 chip
  1. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a headers)
USB Integrated in the South Bridge
  1. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x floppy disk drive connector
  4. 1 x IDE connector
  5. 6 x SATA 3Gb/s connectors
  6. 1 x CPU fan header
  7. 2 x system fan headers
  8. 1 x power fan header
  9. 1 x front panel header
  10. 1 x front panel audio header
  11. 1 x CD In connector
  12. 1 x S/PDIF In header
  13. 1 x S/PDIF Out header
  14. 2 x USB 2.0/1.1 headers
  15. 1 x IEEE 1394a header
  16. 1 x parallel port header
  17. 1 x serial port header
  18. 1 x power LED header
  19. 1 x chassis intrusion header
Back Panel Connectors
  1. 1 x PS/2 keyboard port
  2. 1 x PS/2 mouse port
  3. 1 x coaxial S/PDIF Out connector
  4. 1 x optical S/PDIF Out connector
  5. 8 x USB 2.0/1.1 ports
  6. 2 x IEEE 1394a ports
  7. 1 x RJ-45 port
  8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
  1. iTE IT8720 chip
H/W Monitoring System voltage detection
  1. CPU/System temperature detection
  2. CPU/System/Power fan speed detection
  3. CPU overheating warning
  4. CPU/System/Power fan fail warning
  5. CPU fan speed control (Note 4)
BIOS
  1. 2 x 8 Mbit flash
  2. Use of licensed AWARD BIOS
  3. Support DualBIOS
  4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Form Factor
  1. ATX Form Factor; 30.5cm x 21.0cm

IMG_8517.jpg

Again .. this is a 79 USD motherboard folks ...

Share this content
Twitter Facebook Reddit WhatsApp Email Print