Gigabyte GA-F2A85X UP4 motherboard review

Mainboards 328 Page 5 of 22 Published by

teaser

Product Showcase

 Img_7085

You'll have lots of slots as the GA-F2A85X-UP4 features three PCI-Express Gen2 x16 slots that come with 3-way CrossFire support in a x8 + x8 + x4 configuration. Next to that you'll spot 3 x PCI Express x1 slot, and 1x PCI slots. Your LAN is managed by a Realtek 8111E Gigabit LAN Fast Ethernet Controller, audio is managed through a Realtek ALC892 8-Ch High Definition audio CODEC.

Img_7086

The board has a standard ATX size of 305mm x 244mm. Interesting to see is the uinc;lusion of a diagnostic LED that shows status codes of the motherboard. Next to it you can see the two BIOSes implemented on this motherboard.  Also such a minor detail to see, but look at how clear everything is labaled on the motherboard. I just really like that very much. 

Img_7087 

Underneath the DIMM slots we see a series of buttons for power and reset. Just right of the lower DIMM slot we also spot a CLEAR CMOS button.

Img_7089

And check that, even 8-pin CPU power, as mentioned before this is an Ultra Durable 5 motherboard and thus it comes with IR3550 PowIRstage ICs from International Rectifier, 2X Copper PCB and high current Ferrite Core Chokes rated up to 60A.

 

Img_7088

Here the processor socket area on the Gigabyte GA-F2A85X-UP4 motherboard. The CPU Cooler or HSF mounts remain unchanged, but the socket now has 904 pins. Socket FM1 was used for AMD A-series mainstream Fusion (Llano) processors and had 905 pins.

The difference actually is more than just a pin though as the arrangement has changes as well. So remember that as AMD A10-5800K or for that matter any Trinity based APU can only be used on socket FM2 motherboards due to the 904-pin arrangementThe board has an MSRP of $139.99 and should be available in the retail market soon. Anyway, next page please.

Share this content
Twitter Facebook Reddit WhatsApp Email Print