So the memory kit tested today come from that G.Skill Trident series armed with PSC ICs all packed nicely under the heat spreader design of the DIMM module.
Series - Sniper
Type 240-Pin DDR3 SDRAM Tech Spec
Capacity 8GB (2 x 4GB)
Speed DDR3 1600 (PC3 12800)
Cas Latency 7
Dual Channel Kit
Compatible with Intel P55/P67/Z68 chipset
Manufacturer Warranty Parts Lifetime limited Labor Lifetime limited
The P55/P67/Z68 motherboards recommendation is there because this is dual-channel kit. Now despite what many people think, that doesn't mean you can't use it on a triple channel X58 motherboards, no Sir.
The memory itself is maximize the utmost stability and a user friendly experience. That doesn't mean that this memory won't work at other motherboards, contrary, we gave it a try and if you manually tweak the BIOS settings yourself you can achieve advertised frequency and performance quite easily.
Once installed in the BIOS if supported, select the XMP profile for the memory and after a reboot you are good to go.
If you do not have an XMP profile option in your BIOS, set the 7:8:7:24 timing manually and make sure you set DIMM voltage to 1.60 to 1.65V ... this literally is 10 seconds work.
This trident F3-12800CL7D-8GBSR eight gigabyte DDR3 kit is available for just over 140 USD or roughly 120 EUR. But head on over to the next page where we'll startup a product photo-shoot after which this article will dive into a benchmark session. Hey, we know you like it !
G.Skill Sniper 8GB CL7 DDR3 memory review G.Skill designed another 8GB low voltage DDR3 kit (2x 4GB) that can be set at 1600 MHz yet still run a CAS latency of 7. And that is truly interesting because the denser the ICs get, the higher latency typically gets.
G.Skill 2x4GB CL7 1600 MHz Trident DDR3 review We feel that more memory is rather important, and in that trend memory manufacturers have started to increase the density of DIMM modules. Where 1 and 2GB DIMM modules have been the standard, we now see very good progress in 4 GB DIMM modules. Today we\'ll do things a little different, G.Skill designed a 8GB low voltage DDR3 kit (2x 4GB) that can be set at 1600 MHz yet still run a CAS latency of 7. And that is truly interesting because the denser the ICs get, the higher latency typically gets.
G.Skill Flare DDR3 2000 MHZ C7 AMD kit review We test and review the G.Skill Flare DDR3 2000 MHZ C7 AMD kit. These kits are optimized for AMD platforms preferably with the new six-core X6 processors, and in specific some ASUS motherboards. The kit we'll be testing today obviously comes from that series and is a 2,000MHz CL7-9-7-24 1.65V 4GB (2GBx2) DDR3 kit with its latest Flare heatsinks.
G.Skill Phoenix PRO 120GB SSD review The SSD tested today once again is the Phoenix series from G.Skill. After we tested their 100GB Phoenix SSD (which received a very positive review) G.Skill instantly requested if we would like to review the 120GB PRO model. Both drives pretty much are the same thing, same controller ... The 100GB Phoenix uses Samsung memory though but the trick is that there is 20GB extra volume space available on the new 120GB Pro (compared to the 100GB model) for nearly the same price. A new Firmware for the SandForce 1200 based controller that is inside this 120GB model simply reserves less NAND flash memory for its data-compression scheme. As a result the overall write performance could be a tiny bit slower, but only a few percent as best. It however will give you 20 GB more space to play around with at the same price. And since price per GB is everything in the land of SSDs -- this certainly is a significant for any vendor and for you as an end-user.