An ECO product gallery

Here we have the fans. Both 120mm and PWM based as stated. Overall these are reasonable fans, however once the fan reaches full RPM (roughly 1800~2000) you will hear them . A little too noisy for my taste to be honest. But more on that later in our tests.

Don't forget to get some juice flowing from the pump to the radiator. The radiator itself is 240mm based with two leads for tubing (preinstalled). It's a corrugated tubing that supposedly reduces liquid loss through the material. Each and every ALC unit is tested for leaks before it leaves the production facility. As you can see, everything is finished quite nicely. Both fans are wired to one connector/lead. So you'll only need to use one FAN header on the motherboard.

A small close-up of the cooling block. The tubing to the right, the coolant is already inserted into the unit for you. The coolant is a mixture of 25% Propylene Glycol with a comprehensive anti-corrosion package to ensure there will never be any performance reduction due to build-up or inter-metallic reaction.