Product Gallery

The ATX motherboard cable is 50 CM long and should give you enough reach to the motherboard. At the top we see the fan.  It's rated to 21 dBA of fan noise thanks to the low RPM fan design combined with the new heat-sink design. We can confirm that this PSU is nearly silent.

At the rear side we can see seven modular connectors for the supplied cabling. Red are the heavy duty leads for the graphics cards 6/8-pin power headers, the rest are for peripheral connections; items like HDDs and, for the Gurus, cold-cathode lights, liquid cooling etc ;)

Cabling is nice looking and reasonably lengthy. Standard ATX motherboard cables come in at 50cm, peripheral connectors from roughly 50 to 90cm. The PCIe graphics connector headers are roughly 60 cm in length.

The CPU power header cable is 60cm long which will give you pretty decent reach to the motherboard. This is the one cable that I wish manufacturers should make way longer. Lot's of PSUs are located at the bottom of the chassis these days, requiring a more lengthy cable.

Last photo, at the bottom of the PSU we find a sticker clearly displaying all voltage rails and maximum load states. As you can see, there is one big 12V rail. Some hate that, some love it, but here at Guru3D we feel, if it works either way  .. then who cares ?