Product Showcase - Interior

 
On the rear left we spot another fan, obviously the rear exhaust fan which is a 140 mm fan x 1, 1200 RPM, 19 dBA. Cooler Master uses black cabling for the fans and wiring overall. 
  

 
The usual cables are mostly for front panel connectivity. Cable routing is just not a problem with this chassis though. Keep in mind that the front panel USB 3.0 connectors must be connected to the proprietary USB 3.0 header on the motherboard.

Also the two front fans need a LED lighting system, to get them working you'll need an RGB connector on the mobo or you'll have to purchase an RGB controller. So at default the RGB LED lit fans will not work unless you connect them to a compatible device/feed.

 
And all the way down, the power supply compartment (which is huge in length). On top sit two SSD trays. If you do not like that position, you can move them to the backside of the motherboard tray, we'll show you that on the next pages.

To be able to install the PSU, you'll need to remove both shields that reside at the bottom of the chassis. They're secured with old fashioned screws, but I find nothing wrong with that. Man up a bit dude! :)