Specifications and Features
Ballistix launches Tactical Tracer RGB DDR4 memory
Ballistix has announced the availability of Ballistix Tactical Tracer RGB DDR4 memory. The new Tactical Tracer modules, available in 8GB and 16GB densities with speeds up to 3000MT/s, allow gamers to light up their systems with 16 RGB LEDs in 8 zones on each module. Gamers can customise their system’s look by removing the Ballistix-labeled light bar for maximum brightness, or 3D printing their own light bar. New RGB LED modules improve gameplay and performance while lighting up gaming rigs in style
Technical Specs
- 16 RGB LEDs in 8 zones on each module
- Speeds up to 3000 MT/s
- Module densities up to 16GB, kit densities up to 64GB
- Three light bar options:
- Included Ballistix-labeled light bar gives a diffused RGB look
- Remove the light bar for maximum brightness
- 3D print a new light bar design for the ultimate customisation
- Monitor temperatures and control RGB LEDs with the Ballistix® M.O.D. Utility software
- Limited lifetime warranty
Boise, ID – April 17, 2018 – Ballistix, a leading global brand of gaming memory, today announced the availability of Ballistix® Tactical Tracer RGB DDR4 memory. The new Tactical Tracer RGB modules, available in 8GB and 16GB densities with speeds up to 3000 MT/s, allow gamers to light up their systems with 16 RGB LEDs in 8 zones on each module. PC modders can customise their system’s look by removing the Ballistix-labeled light bar for maximum brightness, or 3D printing their own light bar to truly leave their mark on their memory.
“A lot of the members in our community love to personalise their gaming rigs and the new Tactical Tracer RGB DDR4 modules help achieve just the style they are looking for,” said Jim Jardine, Director of DRAM Product Marketing. “Having an RGB module with a removable light bar that enables you to custom-make your own system gives system builders the best options for customisation and personalisation.”
Tactical Tracer RGB modules also work with the Ballistix® M.O.D. Utility – software that’s designed exclusively for Ballistix modules. Gamers can use the M.O.D. Utility to monitor memory temperatures in real time, adjust Tactical Tracer RGB LED colour schemes and brightness, turn the lights on and off, and switch up display patterns. PC modders can also use their motherboard’s software to sync Tactical Tracer RGB LEDs with the other components in their rig.[1] In addition to increasing personalisation, users get all the features of the Ballistix Tactical series including XMP profiles, stylish black PCB, and custom heat spreaders.
Each memory kit is also validated under a series of rigorous tests for maximum compatibility and reliability on a multitude of platforms.
XMP 2.0 Support & Availability
This latest G.DDR4 series supports the latest Intel XMP 2.0 for an easy one-step memory overclocking experience, providing a boost to memory performance across all types of workloads.
Series | Tactical Tracer RGB |
Memory Type | DDR4 |
Capacity | 32GB (8GBx4) |
Multi-Channel | Dual Channel Kit |
Tested Speed | 2666 MHz |
Tested Latency | 16-18-18-38 |
Tested Voltage | 1.20v |
Registered/Unbuffered | Unbuffered |
Error Checking | Non-ECC |
SPD Speed | 2666 MHz XMP |
SPD Voltage nominal | 1.20v |
Fan included | No |
Height | 43 mm / 1.69 inch |
Warranty | Limited Lifetime |
Features | Intel XMP 2.0 (Extreme Memory Profile) Ready |
Pricing wise you can spot a 16 GB kit for €189,- I have spotted the 3000 MHz 16GB kit sells at €225,- As mentioned on the previous page, DIMMs are expensive this year and age due to limited production from the big guns like Samsung, Micron, SK Hynix, and sorts. So yeah for 2666 MHz, that's roughly 12 euros per GB. Our 32GB kit costs an exhaustive € 379 All modules are equipped with the new style RGB heat-spreader. The memory chips have contact with the heat sink in order to ensure that both memory and the board operate at the same temperature and can thus provide the best performance. Once installed, in the BIOS (if supported) select the XMP profile for the memory and after a reboot you are good to go, it's that simple. If you do not have an XMP profile option in your BIOS, set the timings manually and set DIMM voltage a little higher to 1.35v opposed to an SPD 2133 MHZ config with 1.2 Volts. But head on over to the next page where we'll start up a product photo-shoot after which this article will dive into a benchmark session. Hey, we know you like it.