Graphics card Overclocking
Graphics card Overclocking
As most of you know, with most videocards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply tampering with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need?One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.
Where should we go?
Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.
All in all... do it at your own risk.
| Original | This sample | Overclocked + 1150 Mv |
| Core Clock: 772MHz | Core Clock: 816MHz | Core Clock: 912MHz |
| Shader Clock: 1544MHz | Shader Clock:1632MHz | Shader Clock: 1824MHz |
| Memory Clock: 4000MHz | Memory Clock:4008MHz | Memory Clock: 4560MHz |
Overclocking wise, the Matrix will allow to be clocked similarly a reference card, to roughly 875~900 MHz on the core without voltage tweaking. When you apply a GPU voltage of 1.1 ~1.2v the overclock experience will go up a little.
We reached a stable 912 MHz on 1150 Mv on the core but did have some leash left to roughly 930 MHz. Tweak a little more precise with the final ASUS OC software (was not available for this review just yet) and the 950 MHz to 1 GHz barrier will become an option. The downside of the voltage tweak however is a louder graphics card as it will need to deal with more residual heat. It is a completely different beast noise wise, be prepared for that, also heat will rise fast and the power consumption will get much higher also.
Power consumption jumped up another 50 Watt with a small Voltage tweak. Anyway here's what that does towards overall game performance, the GTX 500 series really likes overclocking and that shows in the numbers.
Above, COD MWF2, maxed out image quality settings as before with 4xAA. With so much GPU power requested by the game, we can actually measure the overclock pretty well.
Above, Battlefield Bad Company 2, maxed out image quality settings as before with 8xAA 16xAF. Here up-to 1920x1200 we run into massive CPU limitation. Once you are freed from that, perf boost upwards alright.
Above, 3DMark 11 - the Performance test and score. As you can see a nice additional bump in this very GPU limiting title, lovely.
