A closer look
The Zalman Reserator XT Hybrid Liquid Cooling System
So the Resorator XT then, opening up the packaging here. Components inside are securely packed inside three separate Styrofoam compartments for protection.
Good, very good .. as you can see everything needed is supplied. The one thing you'll need to purchase though is a litre of distilled water. If you are incapable of getting that, bring water to the boil for 15 minutes assuring most algae is dead and calcium gone (obviously allow it to cool down before using).
This is the kit, look at the Reserator XT, what a lovely sight. The box includes everything needed for quick and easy installation:
- Clear vinyl tubing
- Printed User’s Manual
- Bottle of ZM-G300 coolant
- I/O bracket
- DC power cable and jumper wire
- Degassing tube
- Tubing clamps
- ZM-WB5 CPU waterblock
- Reserator XT main cooling unit
- High performance ultra quiet water cooling system
- Active/passive hybrid cooling design
- Automatic/manual fan speed control modes
- Coolant flow & low-level warning alarms
- Automatic on/off when PC is switched on/off
| |
RESERATOR XT Water Cooling System |
|
| Weight |
7kg |
| Dimensions |
350(L) x 180(W) x 210(H) mm |
| Material |
Anodized Pure Aluminum |
| Coolant Capacity |
Max. 1.25L |
| Integrated Water Pump |
6W, 12VDC, Qmax 300 litres/h |
| Maximum Lift |
1.8m |
No complex connectivity either, this is a very easy to setup kit. You connect the 12V cabling towards your PSU (Molex) and the Reserator is good to go.
Site
Navigation
