This cooler is made out of copper (you guessed it already huh?), is a bit heavier than some, but not too much, and so its weight won’t cause a single trouble. A good thing about this cooler is that it is compatible with a wide range of products from ATi and nVIDIA because of the clearance it has between the card and the heatsink, and because of all those holes, this product is mountable on all those cards. The heatsink is constructed like some “old school” ones if you like, with the fan being directly on top of the core, and the fins located around the outer part of the base.

Specs from the Jetart site:

• Cooler Dimensions: 110 x 88.7 x 31.6 mm 　
• Fan Dimensions: 60 x 60 x 12 mm
• Heatsink Material: Fully Copper, C1100
• Rated Voltage: DC 12 V
• Rated Current: 0.15 A
• Power Consumption: 1.8 W
• Fan Speed: 2500 R.P.M. 　
• Bearing Type: Ball Bearing
• LED: Blue Light
• Weight: 320 g

Accessories:

　• Clip A : For Mounting hole 1
　• Clip B : For Mounting hole 2 or 3
　• Copper Interval Pillar : 5.0 x 13 mm x 4 pcs
　• Cushion Spacer : 8.0 x 0.5 mm x 4 pcs
　• Reserved Screw : M2.0 x 16.0 mm x 4 pcs
　• Reserved Spring :
　　 For Positioning 3 or 4 x 4 pcs
　• Insulation Spacer :
　　 For Positioning 3 or 4 x 4 pcs
　• Memory Heatsink :
　　 20.0 x 20.0 x 6.0 mm x 8 pcs
　• Thermal Tape : 18.0 x 18.0 mm x 8 pcs
　• Power Adapter : 3 to 4 Pin x 1 pc
　• Thermal Grease : Needle Tube 1.5 g x 1 pc

What's included in the packaging.

The cooler is compatible with the following cards:

nVIDIA: GeForce 3, 4 (MX 420/440/460/440 SE/440 8x – Ti 4200/4200 8x/4400/4600/4800), GeForce FX (5200/5500/5600/5600 Ultra/5700 LE/5700/5700 Ultra/5800/5900/5900 XT/5950 Ultra), GeForce series 6 (6200/6600/6600GT/6800/6800GT/6800 Ultra), GeForce series 7 (7800GT/7800GTX).

ATi: Radeon 9000/9000 PRO, Radeon 9200/9200 PRO, Radeon 9500/9550, Radeon 9600/9600 SE/9600 PRO/9600 XT, Radeon 9700/9700 PRO/9800 PRO/ 9800 XT, Radeon X300/X550/X600/X700/X800/X850, Radeon X1300/X1600/X1800/X1900.