The photo's
On the next few pages we'll show you some photos. The images were taken at 2560x1920 pixels and then scaled down. The camera used was a Sony DCS-F707 5.1 MegaPixel.
The Audigy 4 Pro card itself is PCI 2.3 compliant and includes an external breakout box, which is connected to the PCI card via both a FireWire and an undefined connection. It includes 2 FireWire ports, a 1/4” Line-In, a 1/4” Line-In with Mic boost option and gain control, a 2x RCA Line-In, a 1/4” Headphone port, Master Volume control dial, CMSS Enable toggle, SPDIF Optical In/Out, MIDI In/Out, SPDIF Coax In/Out and the proprietary Creative 4-pole Digital Out 1/8” port.
Do you notice that little white connector on the upper left side? You will need to use a mini-molex connector from your power supply connected to that, an adapter is included. But the breakout box likely feeds from 5 or 12 volts.
From left to right, 3x analog sounds in the shape of front 2x, rear 2x and center + subwoofer. In the middle we see a connector that goes to your breakoutbox and all the way on your right a firewire connector.
Site
Navigation
